Home |  Log In
Powered by YSS CRAWLERS!

Axial Racing SCX10 III Build Vol.1!

Axial Racing SCX10 III Build Vol.01

Here comes the New SCX10 III Build!

Items:

1.Lets make it from The Axles!
Axial Racing SCX10 III Build Vol.1

2.All you need is to see the manual, there are nothing to read to build it!
Axial Racing SCX10 III Build Vol.1


3. Kind of, SCX10-II Axle, AR44 and Capra Axle, Currie F9, combine together!
Axial Racing SCX10 III Build Vol.1

4.Gears for the potal part, its the same as Capra, so you can use...「HR over drive portal gear sets! for Axial Capra
Axial Racing SCX10 III Build Vol.1

4.Its slightly different, dont make a mistake!
Axial Racing SCX10 III Build Vol.1

5.You can see the difference!
Axial Racing SCX10 III Build Vol.1

6.Axles are done!
Axial Racing SCX10 III Build Vol.1

7.Next is shocks! put some silicon oil before you put caps on it! So that you dont damage the O rings!
Axial Racing SCX10 III Build Vol.1

8.Take all air out!
Axial Racing SCX10 III Build Vol.1

9.When I see the axle truss, I know these are designed for!!
Axial Racing SCX10 III Build Vol.1

10.Oils are filled! See how it works. rebounds are almost all the same!
Axial Racing SCX10 III Build Vol.1

12.Shocks are done, its same as Capra!
Axial Racing SCX10 III Build Vol.1

13.See how it build transmission! Looks so real! You can use spacer to let you kill the dig and 2 speed function.
Axial Racing SCX10 III Build Vol.1

14.Lot of gears, hardware and bearings!
Axial Racing SCX10 III Build Vol.1

15.Great looking transmission!
Axial Racing SCX10 III Build Vol.1

16.left lever is for the DIG and right one is for the 2 speed!
Axial Racing SCX10 III Build Vol.1

17.When you want to tighten the slipper clutch, see my picture!
Axial Racing SCX10 III Build Vol.1

18.As you can see, you can use 11T to 18T pinion gears for your reference!
Axial Racing SCX10 III Build Vol.1

19.These are how you install balls to the rods! First, try little with this!
Axial Racing SCX10 III Build Vol.1

20.Flip the rodend and snap it in!
Axial Racing SCX10 III Build Vol.1

21.Manual is so good, its actual size!
Axial Racing SCX10 III Build Vol.1

22.When you screw in the rodend to the rod, use 2 drivers!
Axial Racing SCX10 III Build Vol.1

23.See! Its actual size!
Axial Racing SCX10 III Build Vol.1

24.BUT! this 68.4mm rod are not actual size, be careful!
Axial Racing SCX10 III Build Vol.1

25.All done!
Axial Racing SCX10 III Build Vol.1

26.Chassis build!
Axial Racing SCX10 III Build Vol.1

27.I used steering servo, YSS JX Servo[46kg][14V]」 so that I dont need to use Castle Creations CCBEC10A!
Axial Racing SCX10 III Build Vol.1

28.Servo seem to be little squared too much!
Axial Racing SCX10 III Build Vol.1

29.Cut some edges! Cut too much? I think so too!
Axial Racing SCX10 III Build Vol.1

30.Perfect fit!
Axial Racing SCX10 III Build Vol.1

31.Here is incorrect manual! Be careful!
Axial Racing SCX10 III Build Vol.1

32.Use this screw!
Axial Racing SCX10 III Build Vol.1

33.Chassis one side are done!
Axial Racing SCX10 III Build Vol.1

34.Almost done!
Axial Racing SCX10 III Build Vol.1

35.Motor and steering servo is installed!
Axial Racing SCX10 III Build Vol.1

36.Fully metal servo horn!
Axial Racing SCX10 III Build Vol.1

37.Great battery tray! You can adjust and fit your battery!
Axial Racing SCX10 III Build Vol.1

38.Motor cover, oh! Its Engine! Looks so cool!
Axial Racing SCX10 III Build Vol.1

39.Inner fenders are included!
Axial Racing SCX10 III Build Vol.1

40.Transmission, battery and Axles are installed!
Axial Racing SCX10 III Build Vol.1

41.Beadlock wheels are so good for crawlers!
Axial Racing SCX10 III Build Vol.1

42.Chassis are done! Lets install ESC and servos!
Axial Racing SCX10 III Build Vol.1

43.All covered! Looks GOOD!
Axial Racing SCX10 III Build Vol.1

44.DIG and 2 speed transmission micro servo, I used water proof YSS Power HD TR-4[2.6㎏][7.4V], really great servo!
Axial Racing SCX10 III Build Vol.1

45.How I install the servo for the 2 speed!
Axial Racing SCX10 III Build Vol.1

46.Its powerful, and so cool!
Axial Racing SCX10 III Build Vol.1

47.For the DIG servo, I made servo horn like this!
Axial Racing SCX10 III Build Vol.1

48.DIG and 2 speed, Install really neat!
Axial Racing SCX10 III Build Vol.1

49.Body buid!
Axial Racing SCX10 III Build Vol.1

50.For the screws for the body are so small, so I identify like this!
Axial Racing SCX10 III Build Vol.1

51.And I put the screws to the parts, so that I dont mixed up next day build!
Axial Racing SCX10 III Build Vol.1

52.Masking the fenders, I am going to paint them!
Axial Racing SCX10 III Build Vol.1

53.JEEP JL, I decided to painted orange!
Axial Racing SCX10 III Build Vol.1

54.Looks so gooooood!
Axial Racing SCX10 III Build Vol.1

55.All paints are done!
Axial Racing SCX10 III Build Vol.1

56.Great looking colored fenders too!
Axial Racing SCX10 III Build Vol.1

57.I painted the body from also outside!
Axial Racing SCX10 III Build Vol.1

58.Paint, you should use lexan paints!
Axial Racing SCX10 III Build Vol.1

59.Rear looks good too!
Axial Racing SCX10 III Build Vol.1

60.Mandatory pose!
Axial Racing SCX10 III Build Vol.1

61.Inner fenders are great!
Axial Racing SCX10 III Build Vol.1

62.Mandatory pose #2! All done and works great too!
Axial Racing SCX10 III Build Vol.1



Lets enjoy!

YSS Crawlers - Yoshiaki Kataoka


This product was added to our catalog on Tuesday 14 April, 2020.

 | Home | 
Spazstix Japan - Ultimate paint series!