Home |  Log In
Powered by YSS CRAWLERS!

VP Currie F9 & Micky Thompson Wheel install!

VP Currie F9 & Micky Thompson Wheel install!

This time, I will customize install with VP Currie F9 Portal axles and Micky Thompson Wheels!

Items which has trouble installing


1.First of all, I have re-assembled the wheels.
VP Currie F9 & Micky Thompson Wheel install!

2.VP Currie F9 Portal axle has XVD already installed, so the shaft diameter is 5mm, so I drilled out the wheel center holes to 5mm.
VP Currie F9 & Micky Thompson Wheel install!

3.And now I am ready to cut inside of the wheels!
VP Currie F9 & Micky Thompson Wheel install!

4.This is how I have cut inside!
VP Currie F9 & Micky Thompson Wheel install!

5.Now the wheels can not install tires with 6 screws!
VP Currie F9 & Micky Thompson Wheel install!

6.I decided not to hole 7mm to the wheels, I cut 12mm Hex hub.
VP Currie F9 & Micky Thompson Wheel install!

7. Tried to install, there are no problems at all!
VP Currie F9 & Micky Thompson Wheel install!

8. All wheels are cut, done!
VP Currie F9 & Micky Thompson Wheel install!

9.I also made hub can fit 5mm shaft.
VP Currie F9 & Micky Thompson Wheel install!

10.Right one is done, left one is stock.
VP Currie F9 & Micky Thompson Wheel install!

11.Miniatuer Hex bolts are not strong screws, so I used slightly longer M2-8mm screws to start installing bead rings.
VP Currie F9 & Micky Thompson Wheel install!

12. Longer screws are so easy to start installing bead rings with tight tires.
VP Currie F9 & Micky Thompson Wheel install!

13. Done installing tires to the custom Micky Thompson wheels! Check out the center cap too!
VP Currie F9 & Micky Thompson Wheel install!

14. Looks so close, but no problems at all!
VP Currie F9 & Micky Thompson Wheel install!

15. Front and rear, looks so good!
VP Currie F9 & Micky Thompson Wheel install!

Have a great hobby time!


YSS Crawlers Yoshiaki Kataoka


This product was added to our catalog on Friday 08 November, 2019.

 | Home | 
IMEXRC Japan - Home of Kong Tires!