Home |  Log In
Powered by YSS CRAWLERS!

YSS 4 Holes Rear Weight Carrier for XR10! [pair]

2,703YEN(JP)

YSS 4 Holes Rear Weight Carrier for XR10! [pair]

This is rear weight carriers for XR10! Now, not only the front knuckles, you can add the weight to rear adapter! Putting the weight on rear axle, you can amazingly earn low control gravity to your rig!

There are 2 different types that you can add the slug weights. Both works with stock XR10 rear adapters and also the VP rear adapters.

3 holes type:
  • If you are running your rig with not much weight on front, 3 holes type is what you want to start from. add some weights to your rig and learn more how it works with your rig!
4 holes type:
  • If you are running your rig with a lot of weight on front, 44 holes matches to your rig. Take time to think and try to balance front and rear of your rig.

Product Images:
YSS 4 Holes Rear Weight Carrier for XR10! [pair]

YSS 4 Holes Rear Weight Carrier for XR10! [pair]

From this point, all pictures are examples!
YSS 4 Holes Rear Weight Carrier for XR10! [pair]
No hussle, you can just slide into the stock rear lockout adapter!
YSS 4 Holes Rear Weight Carrier for XR10! [pair]
LCG!
YSS 4 Holes Rear Weight Carrier for XR10! [pair]
Accept Clock-able situation!
YSS 4 Holes Rear Weight Carrier for XR10! [pair]
Use VP 1.9 slug weight! all screws are included!
YSS 4 Holes Rear Weight Carrier for XR10! [pair]

YSS 3 Holes Rear Weight Carrier for XR10! [pair]
With stock XR10 wheel, you will need to grind down just a little to install.
YSS 3 Holes Rear Weight Carrier for XR10! [pair]
VP DH Pro Comp + 335 Offset Hubs, no problems!
YSS 3 Holes Rear Weight Carrier for XR10! [pair]
SLW .7" + 225 Offset Hubs, no problems!

How you install, use 3mm drill!
YSS 3 Holes Rear Weight Carrier for XR10! [pair]
Drill 3mm hole to install, before drilling the hole, you will need to setup the angle.
YSS 3 Holes Rear Weight Carrier for XR10! [pair]

YSS 3 Holes Rear Weight Carrier for XR10! [pair]
All screws are included to install!








Sold Out
  • Model: yss_4holeWeightCarrier_XR10
  • 0 Units in Stock
  • Manufactured by: YSS Crawlers


This product was added to our catalog on Friday 27 January, 2012.

 | Home | 
IMEXRC Japan - Home of Kong Tires!