Novak Eiger Crawling Brushed ESC! [2S/3S]
The Eiger mountain
towers amongst the giants of the Swiss Alps topping some 13,000 plus
feet. Let Novak’s Eiger 2S/3S Crawling Brush ESC (#1835) power you to
mountain-high adventures as well! The tiny Eiger is packed with all the
features you need, and is easier to use and more adjustable than any ESC
in its class. Tuning on the rocks is as easy as 1-2-3. No programmers
or wires to fuss with! With four on-board adjustments, the Novak Eiger
Crawling ESC can be customized to suit any type of crawling.
HEAVY-DUTY BEC
The Eiger is
compatible with 2S LiPo packs and has a built-in, heavy-duty 2-amp BEC
that will power high torque single servo setups with ease. The Eiger is
also compatible with 3S LiPo packs! Simply install an external BEC and
enjoy the wheel-spinning good times of 11.1 volts! Yee Haw!
A pro version
is also available. The Novak Eiger Pro 2S/3S Crawling Brush ESC (#1836)
includes Novak’s High-Voltage Universal 3-Amp BEC Module (#5463), and
sports superior transistors for unmatched on-the-rock performance. If
you require the best and fastest on the rocks, the Eiger Pro can handle a
20-turn motor on 3S with no problem.
NOT JUST FOR CRAWLING
The
Eiger and Eiger Pro ESCs come ready to crawl, and will default to the
normal rock crawling settings: forward and reverse with high-power drag
brake. Not only can you adjust the power of your Drag/Hill Brakes via
the simple on-board programming, but you can turn them off completely.
This will set the speed control in normal “Basher” mode with forward,
brake, and reverse operation -just like a regular, non-crawling ESC!
It’s the best of both worlds. Crawling and bashing!
Eiger Features:
- Designed especially for the demands of crawling vehicles to maneuver over the toughest terrain, and also works great for non-crawling applications
- Compact and lightweight design
- Compatible with Novak Terra Claw, Rock Star and other 540-size & 380-size brushed motors
- 4 adjustable parameters: Brake Power/Throttle Mode (5 settings), Dead Band (5 settings), Drive Frequency (5 settings), and Voltage Cut-Off
- Water-resistant case with silicone gasket seal to help keep out the elements
- Built-In Voltage Cut-Off Circuitry prevents damage to LiPo batteries (auto detects 2S or 3S)
- Built-In 6V output for optional accessory fan or other detail items such as running lights
- User friendly One-Touch programming interface with four multi-colored status LEDs to help personalize the speed control's settings
- Novak's One-Touch Set-Up™ for quick, easy transmitter set-up
- Heavy-duty, internal 2A BEC for high-torque single servo applications. Don’t let the specs fool you—all ESC’s BECs are not created equal. The Eiger’s 2A BEC will go toe-to-toe with many other higher rated units.
- Three ESCs in one—The Eiger has a non-crawling, Basher Mode and can be used in any 1/10th, 1/12th, 1/16th, or 1/18th application with a 20T or higher brushed motor. Additionally, The Eiger has a Servo Mode for forward and reverse directions (no brakes) that can be used for robotic applications.
- Built-in diagnostic temperature monitoring lets you quickly check the ESC's operating temperature at any time
- Thermal Overload Protection circuitry to protect the ESC from overheating
- Gold-plated direct-solder wiring tabs for flexible soldering options
- Plug-and-Play—The Eiger is factory-wired with Tamiya® battery plug & gold-plated Bullet motor plugs.
- Factory installed power capacitor
- User-replaceable input harness
- Meets RoHS compliance and includes 120-Day Warranty
- Designed, assembled and tested by Novak in Irvine, Calif., using globally sourced components
Product Pictures:
This product was added to our catalog on Tuesday 14 February, 2012.
