Novak 3A High Voltage Universal BEC Unit #5463!
Novak has expanded its line of Universal BECs to include four easy-to-use products
that provide consistent power to your vehicles. Each item is designed
for specific-driver needs, and here are Novak's recomendations:
#5466
5-Amp High-Voltage Universal BEC
Novak's 5-Amp High-Voltage Universal BEC (#5466)
allows drivers to run higher voltage main battery packs up to 28 Volts
(9-22 Ni-MH Cells or 3-7 Li-Po), and regulates output to 6 Volts / 5
Amps to provide consistent, glitch-free power to your receiver and
servos throughout the charge.
Novak’s 5-Amp BEC is ideal for applications that use higher main
battery pack voltage, such as 1/8-scale electric racing, rock crawling
or any application that draws up to 28 volts from the main battery
pack. To improve operation of applications with high current draws,
this BEC is highly recommended when using single 3S to 7S Li-Po packs.
This small and lightweight BEC accommodates high-power servos and helps
regulate the additional current draw without taking up too much space
in your vehicle.
#5465
5-Amp Universal BEC
Like
its name implies, the 5-Amp Universal BEC (#5465)
can be used in any car and is specially designed to excel in
gas-powered cars because of the high loads placed on the two
servos. The 5-Amp BEC can easily run high-powered servos and is less
likely to be over taxed because of its higher current rating.
#5463
3-Amp High-Voltage Universal BEC
The 3-Amp HV Universal BEC (#5463) is ideal
for applications that use higher main battery pack voltage such as
monster trucks, speed run cars, boats, planes, helicopters or anything
that uses above 12 or more volts in the main battery pack. This is due
to the fact that most speed control BECs have difficulty handling more
then 8.4 volts input.
Novak's
3-Amp High-Voltage BEC allows you to run higher voltage main battery
packs up to 26.4 volts (4-22 Ni-MH Cells or 2-7 Li-Po) and regulates
output to 6 Volts/3Amps to provide consistent power to your electronics
throughout the charge.
#5460
3-Amp Universal BEC
The 3-Amp Universal BEC (#5460) (formerly
called the Nitro Servo Regulator) is designed for use with higher
voltage receiver battery packs (6-8 cell Ni-Cd or Ni-MH, or 2-cell
Li-Po packs) used in nitro vehicles. The regulator takes input voltage
from 6.3 to 8.4 volts, and provides a constant 6 volts and 3 amps of
regulated power to the receiver and servo. This allows the servos
to operate at their optimum levels, prevent servo damage and extend
runtimes.
The
#5460 BEC is ideal for users looking for a simple, easy-to-use,
one purpose item.
These
products are designed as competition-based units and do not feature any
low-voltage cut-off or safety.
Product pictures:
Search: 3-Amp High-Voltage Universal BEC | #5463
This product was added to our catalog on Thursday 26 January, 2012.
