Axial SCX10-III RTR fully function!
Here are how you fully function the SCX10 III RTR Series!
RTR Selections:
1.This is how it looks, this is JLU RTR!
2.You will need 1 x "
YSS Spektrum SX107 Micro Servo for the 2 speed function.
3.Take the gearbox OFF！ Skid plate screws.
4.Take the gearbox OFF！ Geabox mount screws.
5.Take the gearbox OFF！ Engine cover screws.
6.This is where you need to disassemble.
7.Take off the screws.
8.Also here!
9.And going on!
10.You also need to take this rodend off!
11.I used drill to take the rodend off!
12.See the parts, this is what you want to take it off.
13.And after that assemble the gearbox and done!
14.Grease made gearbox shinny!
15.This is spare parts bag from RTR.
16.These parts are inside.
17.What you need are the below.
18.Servo horn is done.
19.Installed servo!
20.To the AUX2, installed!
21.Spektrum DX5C! 5channed transmitter.
22.use Travel to adjust the stroke of the servo.
23.I setup the 2-position setting for the 2 speed servo.
25.All done! works great!!
Lets enjoy!
YSS Crawlers - Yoshiaki Kataoka
This product was added to our catalog on Wednesday 29 March, 2023.
